Technical note Open Access
{ "DOI": "10.15161/oar.it/76867", "abstract": "<p>The demand of large area GEM detectors requires extreme working conditions of the layered foils from structural point of view; larger area need higher biaxial tensile loads to overcome large deflections and the related stresses may exceed the copper yield limit just around the holes; the present work shows that for a trapezoidal CMS GEM foil (W=1040 mm; L1=530 mm; L2=345 mm) the sag due its own weight is about f =28.6 μm (electrostatic loads not included) for a tensioning of S=1 N/mm; the related stresses are lower than the yield only in a biaxial load. Numerical results are from ANSYS Educational v.10 [1] and their level of accuracy is very good when compared to some theoretical and experimental results.<br>\n </p>", "author": [ { "family": "G. Raffone" } ], "id": "76867", "issued": { "date-parts": [ [ 2010, 9, 20 ] ] }, "language": "eng", "title": "CMS Trapezoidal GEM Foils Structural Analysis", "type": "article" }
All versions | This version | |
---|---|---|
Views | 0 | 0 |
Downloads | 0 | 0 |
Data volume | 0 Bytes | 0 Bytes |
Unique views | 0 | 0 |
Unique downloads | 0 | 0 |